Sporlan Controls 952960 IB6Q INTERFACE BOARD
PARKER 952960 IB6Q (ASP)
Locn G9D135
MOUNT the BOARD
The IB Series is based on a 3.0” x 3.0” circuit card with
0.125” mounting holes, 0.25” from each corner. If desired,
these mounting holes may be used with customer supplied nonmetallic
standoffs. The IB Series does, however, come supplied
witha length of snap-in plastic track. The track should be
mounted in the desired LOCAIION and one side of the IB engaged in
the upper groove in the track. The IB is then pushed down so that
the opposite side of the board snaps into the uppermost groove
in the opposite side of the track. The board may be mounted in
the orientation most convenient for wiring. LOCAIION should be
dry, protected and close to the 24 volt power supply and external
controller.
