3，液下泵關閉出口管路閥門及壓力表。4，液下泵起動電想法，以壓力表指示敞開出口閥門到需要位置。5，液下泵正常泊車，該關閉出口閥門，然后間斷電想法，關閉壓力表。6，液下泵軸承室應包管滿足的油脂，軸承溫升不得高于70℃。三 液下泵的設備需要1，鍋爐給水泵泵必需筆直設備在液料池或水槽上面的固定支架上。2，液下泵泵的吸進口距離池底部應大于200㎜。3，液下泵泵的出口管路必需另設支架，不容許將其重量直接落在泵體上。?。

汾陽市6/4D-AH細沙機渣漿泵參考渣漿泵運行中，要注意填料壓蓋部位的溫度和滲漏。正常的填料滲漏應不超過每分鐘10-20滴。huiquanjdzj

Shaft seal(seal): The shaft seal type of the pump has packing seal, cover impeller seal, mechanical seal.
Transmission: There are V-type triangular belt transmission, elastic coupling transmission, gear gearbox transmission, hydraulic coupling transmission, frequency conversion drive device, Silicon controllable speed adjustment and so on. Among them, the V-type triangular belt drive has CL, CV, CR, ZL, ZV, and ZR transmissions.
Overall performance: wide range of pump performance, cavitation performance, high efficiency. Multistage tandem technology can be used for long-distance transportation. There are a variety of metals available for the flow parts and the depth is increased. With various speeds and variations, the pump is operated under good engineering. Long service life, high operating efficiency, can be many kinds of poor transportation conditions.

汾陽市6/4D-AH細沙機渣漿泵參考軸承組件：泵的軸承組件采用圓筒式結構，便于葉輪與前護板的間隙，時可整體拆出。軸承采用油脂。