BOHLER FOX CN13/4E410NiMo-15不銹鋼焊條B?HLER FOX CN 13/4 Stick electrode Classifications high-alloyed EN ISO 3581-A: AWS A5.4: E 13 4 B 6 2 E410NiMo-15 Characteristics and field of use Basic coated stick electrode for same-type corrosion-resistant, martensitic and martensitic-ferritic rolled, forged and cast steels. Used in the construction of water turbines and compressors, and in the construction of steam power stations. Resistant to water, steam and seawater atmospheres. Thanks to optimisation of the alloy composition, the weld metal, in spite of its high tensile strength, achieves exceptional extension and toughness figures, as well as a high resistance to cracking. The weld metal is also characterised by an extremely low hydrogen content (HD ≤ 5 ml/100 g). Exceptional slag detachability and seam cleanliness. Deposition efficiency about 130%. Base materials 1.4317 GX4CrNi13-4, 1.4313 X3CrNiMo13-4, 1.4407 GX5CrNiMo13-4, 1.4414 GX4CrNiMo13-4 ACI Gr. CA 6 NM, S41500 Typical analysis of all-weld metal (Wt-%) C Si Mn Cr Ni Mo 0.035 0.3 0.5 12.2 4.5 0.5 Mechanical properties of all-weld metal Heat Treatment Yield strength 0.2% Tensile strength Elongation (L0=5d0) Impact values in J CVN MPa MPa % +20°C: -20°C: -60°C: untreated 890 1090 12 32 t* 680 910 17 66 55 50 *tempered, 600 °C/2 h/air Operating data Polarity = + Dimensions (mm) Amperage A 2.5 x 350 60-90 3.2 x 450 90-130 4.0 x 450 120-170 5.0 x 450 160-220 Approvals and certificates TüV (3232.), LTSS, SEPROZ, CE Similar alloy filler metals Stick electrode: FOX CN 13/4 TIG rod: CN 13/4-IG SUPRA Wire/flux combination: CN 13/4-UP/BB 203 Flux cored wire: CN 13/4-MC Solid wire electrode: CN 13/4-IG CN 13/4-MC (F)
