NICROMANG® PLUS COATED
NICROMANG®+涂
STOODY NICROMANG PLUS is similar to Stoody NicroMang except it is formu-
STOODY NICROMANG +類似STOODY NICROMANG formu -除外
lated to produce a higher hardness in the “as-welded” condition. This higher
遲來的生產高硬度的“焊接狀態”狀態。這個更高
hardness will reduce the amount of initial metal deformation under heavy loads.
硬度會減少初始金屬變形下沉重的負荷。
NicroMang Plus is not recommended for buildup on carbon steel.
NicroMang +不推薦對碳鋼積聚。
Welding Procedures/Characteristics: Can be applied AC or DC, either polarity
焊接程序/特點:可以應用交流或直流極性
(reverse preferred) using stringer or weave beads. Weldability is good in the flat
(反向首選)使用縱桁或編織珠子。可焊性良好的平的
and horizontal positions. Multiple layers can be applied without difficulty when
和水平位置。當多層可以應用沒有困難
proper procedures are followed. Maintain low heat input, do not exceed 500
遵循適當的程序。保持低熱量輸入,不超過500
degrees interpass temperature and peen with the flat face of a hammer, when
度層間溫度與平面的錘子,錘頭的時候
possible, to relieve weld stress.
可能,減輕焊接壓力。
Applications: Manganese Railroad Frogs and Crossings, Manganese Steel
應用程序:錳鐵路青蛙和口岸,錳鋼
Castings
鑄件
Typical Chemical Composition:
典型的化學成分:
Alloy Content – 23% (Manganese, Chromium, Carbon, Molybdenum,
合金含量- 23%(碳、錳、鉻、鉬、
Nickel)
鎳)
Iron Base
鐵基