商鋪名稱：午虎特種合金（上海）有限公司
聯系人：蔡玉蘭（小姐）
聯系手機：
固定電話：
企業郵箱：18117348636@163.com
聯系地址：泗磚路600號
郵編：200000
聯系我時，請說是在焊材網上看到的，謝謝！
INCO-CORED FC82DH ＆ FC82AP 藥芯焊絲AWS A5.34隨貨質保書
INCO-CORED FC82DH ＆ FC82AP 藥芯焊絲
INCO-CORED FC82DH ＆ FC82AP 藥芯焊絲AWS A5.34隨貨質保書
INCO-CORED FC82DH 和 FC82AP 藥芯焊絲在化學成分和性能上都與INCONEL 82光焊絲完全一樣。它們都具有出色的焊接性，由于藥芯的緣故，這兩種焊絲還具有更高的熔敷效率。這些焊絲都使用75％氬氣和25％二氧化碳混合氣體作保護氣。
這些產品可以用于INCONEL 600\601合金、INCOLOY 800／800HT合金以及INCO 330合金的焊接。它們還可用于很多異種材料連接的場合，特別是碳鋼與不銹鋼或鎳基合金之間的焊接。INCO-CORED FC82DH 和 FC82AP 藥芯焊絲還常用于在碳鋼和低合金鋼表面進行堆焊。
能量供給：直流反接。
|
規格 本產品已經提交AWS規范，有望被列入AWS A5.34作為ERNiCr3T0-4和ERNiCr3T1-4。其它規格后續申請。
|
|
典型化 Ni…...….…..72 C……..…….…0.04 學成分 Cr…………..19 Ti………..…....0.25 Mn……….…..3 S……….…....<0.01 Nb…………2.5 Si……………….0.3 Fe………….2.5 P……………..<0.01 Al………...0.05 其它…………..<0.5 Cu………..0.05
|
|
最低機械 拉伸強度，psi 80,000 性能 Mpa 552 延伸率，(4d) % 30
|
|
產品供貨形態 |
|
線卷狀焊絲直徑：.045”(1.14mm)和0.062” (1.6mm) |
INCO-CORED FC82DH & FC82AP flux CORED wire
INCO-CORED FC82DH and FC82AP flux CORED wire are identical in chemical composition and performance to INCONEL 82. Both of them have excellent weldability, and due to the core of the drug, these two kinds of wires have higher melting efficiency. These wires are all protected by 75% argon gas and 25% carbon dioxide gas.
These products can be used in the welding of INCONEL 600\601 alloy, INCOLOY 800/800HT alloy and INCO 330 alloy. They can also be used for a number of interconnection occasions, especially between carbon steel and stainless steel or nickel-base alloys. INCO-CORED FC82DH and FC82AP flux CORED wire are also used for surfacing welding on the surface of carbon steel and low alloy steel.
Energy supply: dc reverse connection.
Specifications have been submitted to the AWS specification and are expected to be included in AWS A5.34 as ernicr3t0-4 and ernicr3t1-4. Subsequent applications for other specifications.
Typical Ni... ... ... .... ... 72 C... ... ... .... 0.04
Learn composition Cr............ ... 19 Ti......... ... ... ... 0.25
Mn......... .... ... 3 S......... .... ... < 0.01
Nb............ 2.5 Si........................ 0.3.
Fe............ 2.5 P............... ... < 0.01
Al......... ... 0.05 other............ ... < 0.5
Cu......... ... 0.05
Minimum mechanical tensile strength, psi 80,000
Properties of 552 Mpa
Extension, (4d) % 30
Product form
Diameter of wire coil welding wire:.045 "(1.14mm) and 0.062" (1.6mm)
